Origin Endeavours

Storage Tank Inspection Checklist: What Inspectors Look for & Why It Matters

Storage Tank Inspection

Storage tanks are critical assets in industries like oil & gas, chemical processing, water treatment, and agriculture. Whether used for fuel storage, hazardous chemicals, or water reserves, these tanks must be kept in optimal condition to avoid leaks, contamination, or structural failures.

Routine storage tank inspections aren’t just about compliance—they prevent costly repairs, extend equipment lifespan, and ensure workplace safety. A small issue like corrosion or a pressure imbalance can quickly escalate into a serious hazard if left unchecked.

This article breaks down a comprehensive checklist that professional inspectors use to assess storage tanks. Understanding what they look for helps businesses stay compliant with Australian regulations and avoid costly downtime.

Read also: 5 Signs Your Storage Tank Needs Immediate Inspection

Why Regular Storage Tank Inspections Are Essential

A proactive inspection schedule can save businesses thousands of dollars in repairs, prevent environmental hazards, and ensure compliance with industry standards like API 653 and AS/NZS 4766. Here’s why regular inspections should be a non-negotiable priority:

  • Prevents Leaks & Structural Failures – Undetected corrosion or cracks can lead to hazardous spills.
  • Ensures Regulatory Compliance – Failure to meet safety standards can result in fines, legal action, and operational shutdowns.
  • Increases Equipment Longevity – Regular maintenance helps storage tanks last decades instead of needing premature replacements.
  • Reduces Environmental Risks – Tank failures can lead to soil contamination, water pollution, and health hazards.

Skipping routine inspections often results in bigger, more expensive problems later on.

The Storage Tank Inspection Checklist: What Inspectors Look For

Certified inspectors follow a structured assessment process to ensure storage tanks remain safe, functional, and compliant. Here’s what they typically examine:

A. External Inspection: Spotting Visible Issues Early

  • Tank Surface Condition: Inspectors check for rust, cracks, dents, or bulging, which may indicate internal pressure problems.
  • Coating Integrity: Peeling or bubbling paint suggests that protective coatings have deteriorated, increasing the risk of corrosion.
  • Foundation & Support Structure: A shifting base or cracks in the foundation can cause instability.
  • Leak Detection: Any discoloration, stains, or liquid pooling around the tank could indicate slow leaks that require urgent attention.

B. Internal Inspection: Identifying Hidden Risks

  • Wall Thickness Testing: Ultrasonic sensors measure metal thickness to detect thinning areas before they become leaks.
  • Weld Seam Integrity: Inspectors assess welded joints, as weak welds are common points of failure.
  • Sediment & Sludge Build-Up: Excessive buildup at the bottom of the tank can reduce efficiency and affect stored material quality.
  • Corrosion Under Insulation (CUI): Insulated tanks are vulnerable to hidden rust formation beneath protective layers.

C. Structural & Safety Components: Ensuring Full Compliance

  • Pressure Relief & Venting Systems: Ensuring proper pressure regulation prevents explosions or implosions.
  • Spill Containment Measures: Secondary containment barriers must be inspected to ensure they can handle potential leaks.
  • Fire Suppression Systems: Emergency measures such as fire-resistant coatings, foam suppression, or automatic shutoff systems are checked.

Common Issues Found During Inspections & How to Address Them

Even well-maintained storage tanks develop issues over time. Some of the most frequent problems found during inspections include:

  • Corrosion & Rusting → Protective coatings should be applied regularly to prevent deterioration.
  • Cracks or Structural Weakness → Weak spots in the tank’s structure require reinforcement or welding repairs.
  • Sediment Accumulation → Routine tank cleaning removes sludge and prevents contamination.
  • Seal & Gasket Deterioration → Worn-out seals should be replaced to maintain airtight storage and prevent leaks.

Addressing these issues early prevents expensive emergency repairs and potential safety risks.

How Often Should Storage Tank Inspections Be Done?

Inspection frequency depends on the type of tank, its contents, and industry regulations:

  • Above-ground storage tanks (ASTs) – Require a comprehensive inspection every 5 years and annual visual checks.
  • Underground storage tanks (USTs) – Demand specialized leak detection and regular monitoring.
  • High-risk industries – Tanks storing hazardous chemicals may require more frequent assessments.

Maintaining a detailed inspection log helps businesses track past assessments, schedule preventive maintenance, and spot recurring issues early.

Best Practices for Long-Term Storage Tank Maintenance

A well-maintained tank lasts significantly longer than one that’s only checked sporadically. Here are key best practices for preventative maintenance:

  • Schedule Regular Inspections – Following an industry-standard maintenance plan prevents long-term damage.
  • Partner with Certified Inspectors – Trained professionals use advanced techniques like ultrasonic testing and acoustic emission analysis.
  • Monitor for Early Warning Signs – Employees should be trained to identify leaks, pressure fluctuations, and unusual tank behavior.
  • Invest in High-Quality Materials – Using durable coatings and robust components reduces the likelihood of breakdowns.

A proactive approach ensures storage tanks remain safe, functional, and legally compliant.

Read also: How Regular Storage Tank NDT Inspections Can Save Your Money

Conclusion: Schedule Your Storage Tank Inspection Today

Regular storage tank inspections are essential for safety, compliance, and long-term asset protection. By understanding what inspectors look for and addressing common issues early, businesses can avoid costly repairs and operational disruptions.

A well-maintained storage tank performs more efficiently and lasts significantly longer, making routine inspections a valuable investment. If you’re considering an assessment, working with experienced professionals ensures the job is done thoroughly and in line with industry regulations.

For tailored inspection solutions, speak with a certified storage tank specialist to explore the best approach for your facility.

darrel

Darrell Lawrie

Darrell is the founder of Origin Endeavours, an experienced API 653 Above Storage Tank Inspector with 12 years of experience in the oil and energy industry. He is skilled in API and ASME standards, engineering, and oil & gas. A certified API 653 Tank Inspector, Darrel specializes in conducting inspections, developing inspection procedures and training programs, and maintaining alignment with industry standards. As an NDT Services Manager, he has experience in developing tank inspection and NDT procedures and processes and providing necessary documentation for clients.

Read More Articles

This website uses cookies and asks your personal data to enhance your browsing experience. We are committed to protecting your privacy and ensuring your data is handled in compliance with the General Data Protection Regulation (GDPR).